NEC Univerge SV8300 - [Cm62] Tenants for each Att Group

3-442 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
TENANTS FOR EACH ATT GROUP
62
FUNCTION:
This command is used to assign which tenants are handled by each DESKCON Group.
[8300R2]
PRECAUTION:
(1) This command requires a reset by CM60 Y=90>0: 0 after data setting.
(2) Multiple tenants can be assigned to one ATT Group, but one tenant cannot be assigned to more
than one ATT Group.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
62Y
DATA
DE
TENANT NUMBER
(2 digits) (1 digit)
++
DE
: Default
Y TENANT SETTING DATA
RELATED
COMMAND
No. MEANING No. MEANING No. MEANING
0
1
2
3
ATT Group 0
ATT Group 1
ATT Group 2
ATT Group 3
00
63
Tenant 00
Tenant 63
0
1
To handle
Not handled
CM60 Y=00
~
~
NOVEMBER/12/2008
CM62