NEC Univerge SV8300 - Call-By-Call Service Selection

INTRODUCTION
6 NWA-033623-001 Rev.8.1
91ch0001.fm
REFERENCE MANUAL
REFERENCE MANUAL
Refer to the following manuals for information on each service programming.
System Manual:
Contains the system description and the programming procedure of the SV8300 System.
Programming Manual:
Contains procedure for programming each business, hotel, ISDN, OAI and WCS feature.
Networking Manual:
Contains the system description and the programming procedure for the CCIS, Q-SIG and Remote
UNIT over IP System.
System Data Programming Manual:
Contains the Customer Specifications Sheets and the System Data Programming Sheets.
PC Programming Manual:
Contains the functional description and the installation procedure for the PCPro.
System Hardware Manual:
Contains the installation procedure for the PBX system and the hardware installation procedure for
the SV8300.
System Maintenance Manual:
Contains the maintenance service features and the recommended troubleshooting procedure.
NOVEMBER/12/2008