NEC Univerge SV8300 - [Cm56] Paging Group;Intercom Group

3-425 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
PAGING GROUP/INTERCOM GROUP
56
FUNCTION:
This command is used to assign the Multiline Terminal/Soft Phone station number for Automatic/
Manual/Dial Intercom and Internal Zone Paging.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
NOTE 1: The maximum number of Internal Zone Paging Group per system is as follows.
- A maximum of 8 zone (CM56 Y=00-07) Internal Zone Paging Group are available for In-
ternal Zone Paging access.
- A maximum of 6 zone (CM56 Y=00-05) Internal Zone Paging Group are available for All
Zone Internal Paging.
NOTE 2: A maximum of 16 Multiline Terminals (Serial number within the group 00-15) can be as-
signed for each Internal Zone Paging Group. A Multiline Terminal can be assigned for mul-
tiple Internal Zone Paging Groups.
Continued on next page
ST
EXE++ +
+
56YY
DATA
DE
SERIAL No.
(2 digits) (1-8 digits)
++
DE
INTERCOM No.
(4 digits)
: Default
Y
INTERCOM No./
SERIAL No.
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00
07
Internal Zone Paging
Group 0
Internal Zone Paging
Group 7
NOTE 1
NOTE 2
00-15: Serial number
within the group
X
XXXXXXXX
NONE
My Line number of
Multiline Terminal
No data
CM08>158
CM15 Y=049
CM20 Y=0-3:
A130-A145, A164
CM90 Y=00:
F1270-F1277,
F1299
~
~
~
JANUARY/31/2012
CM56