NEC Univerge SV8300 - [Cmee] Application Blade Data Assignment

3-690 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
APPLICATION BLADE DATA ASSIGNMENT
EE
FUNCTION:
This command is used to assign the IP address to connect the functions and Web consoles for each
In-Skin UMS blade (CD-VM00)/Conference blade (CD-PVAA).
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
BLADE RESET
+EE0+ + + + +
2ND DATA
EXEST DEDE
(3-15 digits)
1ST DATA
(4/7 digits)
: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
0 License limitation for
each In-Skin UMS
blade
XXYYZZZ XX : Unit number (01-50)
YY : Slot number (01-18)
ZZZ: Option Value number
044: In-Skin UMS
FAX port
(channel)
[8300R4]
046: In-Skin UMS
Client license
(View Apps)
[8300R4]
047: In-Skin UMS
Multi Language
001
NONE
Number of limits
No data
1 IP Address for Con-
ference blade/In-Skin
UMS blade
XXYY XX: Unit number (01-50)
YY: Slot number (01-18)
XXX.XX
...X
NONE
IP Address (Maximum 15 digits)
XXX.XXX.XXX.XXX.=
0.0.0.1-255.255.255.254
192.168.1.70 (In-Skin UMS)
192.168.0.71 (Conference blade)
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the IP address by this data, a period (.) must be entered between the numbers (example:
255.255.255.254).
Continued on next page
JUNE/15/2011
CMEE