3-508 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
MAXIMUM NUMBER OF SENDING DIGITS
85
FUNCTION:
This command is used to define the maximum number of digits which can be dialed, after C.O. access,
given a specific first digit.
PRECAUTION:
This command is effective when CM35 Y=076 is assigned.
ASSIGNMENT PROCEDURE:
DATA TABLE:
NOTE 1: If the office code is not assigned with this command, the maximum number of sending digits
is automatically set to “24”.
NOTE 2: Allows the development of a secondary table.
Continued on next page
+
85Y
++
MAXIMUM NUMBER
++
OF SENDING DIGITS
(2 digits)
EXE
ST DEDE
AREA/OFFICE CODE
(1-8 digits)
+
: Default
Y
AREA/OFFICE CODE MAXIMUM NUMBER OF SENDING DIGITS
No. MEANING
0
7
Area Code
Development
Pattern No. 0-7
0-4: For Toll Restric-
tion
5-7: For LCR
See
CM35 Y=076
CM8A Y=4000-
4004, 4005-4007
X
X...X
(Maxi-
mum
8 digits)
Area/Office Code,
or its part
X: 0-9, A (*) B (#)
01
24
79
80
84
85
87
1 digit
24 digits NOTE 1
79 digits
Go back to Area Code Development
Pattern No. 0 for Toll Restriction
(CM85 Y=0) NOTE 2
Go back to Area Code Development
Pattern No. 4 for Toll Restriction
(CM85 Y=4) NOTE 2
Go back to Area Code Development Pat-
tern No. 5 for LCR
(CM85 Y=5) NOTE 2
Go back to Area Code Development Pat-
tern No. 7 for LCR
(CM85 Y=7) NOTE 2
JULY/17/2009
CM85
To Next Page
Loading...
