NEC Univerge SV8300 - [Cm48] Hold;Wake Up;Timed Reminder;Automated Attendant; Tone

3-392 NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE
TITLE:
HOLD/WAKE UP/TIMED REMINDER/AUTOMATED ATTENDANT
TONE
48
FUNCTION:
This command determines the kind of tone/tone source on various services; it also determines whether
the Announcement Service is provided when a PS does not answer in a Wireless Communication Sys-
tem.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+ 48Y + +
1ST DATA
++ +
2ND DATA
(2/4 digits)
EXEST DEDE
(1-8 digits)
: Default
NOTE 1: External hold tone through the PGD (2) -U10 can not be sent to IP trunk (P2P CCIS) and
SIP Trunk.
NOTE 2: When IP station is used, this data is not effective. In this case, the hold tone source on IP
Station is sent.
Continued on next page
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
0 Hold Tone
Sending
00
01
02
C.O. Line
Tie Line
Station
0000 No Tone
0500 Hold Message CM49 Y=00
1300 External Hold Tone
Source on CPU blade/
External Hold Tone
Source NOTE 2
CM64 Y=1
1400 Hold Tone Source on
CPU blade NOTE 2
CM48 Y=3
1500 Internal Tone Generator
NOTE 2
NONE Internal Tone Generator
NOTE 2
APRIL/16/2010
CM48