NEC Univerge SV8300 - [Cma7] Ccis Channel;Ip Trunk;Sip Trunk Data

3-573 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
CCIS CHANNEL/IP TRUNK/SIP TRUNK DATA 1
A7
FUNCTION:
This command is used to assign the various data to each Common Channel Handler (CCH), IP Trunk
and SIP Trunk provided.
PRECAUTION:
When setting the IPT (P2P CCIS) No. with this command, be sure to set the first data to “00”.
ASSIGNMENT PROCEDURE:
DATA TABLE:
CCIS CHANNEL DATA
ST
EXE++ +
+
A7YY
DATA
DE
CCH/IPT/SIP TRUNK No. (00-15)
(1-5 digits)
++
DE
: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Trunk used as Common Signaling
channel/IPT (P2P CCIS)/SIP trunk
000
511
NONE
Trunk number assigned by CM10
Y=00
No data
CM10 Y=00
01 Originating Point Code (OPC) 00001
16367
NONE
Originating Point Code
No data
NOTE 1: The Originating Point Code is used to designate an originating office in the No. 7 CCIS network.
A single OPC should be assigned to IPT No. 0 and all other IPT (P2P CCIS) provided in the same
office.
NOTE 2: Do not change this data while the system is operating. If you do that, the operation of IP Stations
will be unstable.
Continued on next page
~
RESET
~
JUNE/15/2011
CMA7