NEC Univerge SV8300 - [Cm96] Dss Console Number

3-559 NWA-033623-001 Rev.8.1
91ch3006.fm
COMMAND CODE
TITLE:
DSS CONSOLE NUMBER
96
FUNCTION:
This command is used to assign a DSS Console to a station, Multiline Terminal or Attendant Console.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+96+ +
DSS CONSOLE
++ +
NUMBER
DATA
(2 digits)
EXE
ST
DEDE
(1-8 digits)
: Default
NOTE: When DSS Console is connected to the side option of the DT700 Series, be sure to set the
station number connected to the DT700 Series.
DSS CONSOLE
NUMBER
SETTING DATA
RELATED
COMMAND
DATA MEANING
00
31
See CM10 Y=00: E100-
E131
X
XXXXXXXX
Single Line Telephone station number
or My Line number of Multiline Termi-
nal
CM10 Y=00: E100-E131
CM97
E000
E007
Attendant Console number
[8300R2]
CM10 Y=00: E000-E007
NONE No data
~
~
~
APRIL/16/2010
CM96