NEC Univerge SV8300 - [Cm73] Memory Allocation for Station Speed Dialing

3-475 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR STATION SPEED DIALING
73
FUNCTION:
This command is used to allocate memory areas for Station Speed Dialing to individual stations.
PRECAUTION:
The allowed number of 10-Slot Memory Blocks per station number ranges from 1 to 10.
ASSIGNMENT PROCEDURE:
DATA TABLE:
NOTE 1: If one of the 1000-Slot Memory Blocks is used for Station Speed Dialing (indicated with
CM08>110, 111, 112, or 176) and MultiLine Terminal one-touch memory (indicated with
CM94), it cannot also be used for Station Speed Dialing.
Continued on next page
ST
EXE++ +
+
73
DATA
DE
STATION NUMBER
(1-8 digits) (7 digits)
++
DE
: Default
STATION NUMBER SETTING DATA
X
XXXXXXXX
Station number
which performs Sta-
tion Speed Dialing
WW XX Y ZZ
NONE
WW: 1000-Slot Memory Block number (00-19)
XX : 10-Slot Memory Start Block number (00-99)
Y : Facility for programming the dialed number from the
station (0/1=Allowed/Not allowed)
ZZ : Number of 10-Slot Memory Blocks (01-10)
NOTE 1, NOTE 2
No data
~
JANUARY/14/2011
CM73