NEC Univerge SV8300 - Page 747

3-691 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
APPLICATION BLADE DATA ASSIGNMENT
EE
BLADE RESET
: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
2 Subnet Mask for
Conference blade/
In-Skin UMS blade
XXYY XX: Unit number (01-50)
YY: Slot number (01-18)
XXX.XX
...X
NONE
Subnet Mask
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
255.0.0.0-255.255.255.252
255.255.255.0
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the Subnet Mask by this data, a period (.) must be entered between the numbers
(example: 255.255.255.252).
3 Default Gateway for
Conference blade/
In-Skin UMS blade
XXYY XX: Unit number (01-50)
YY: Slot number (01-18)
XXX.XX
...X
NONE
Default Gateway
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
0.0.0.0
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the Default Gateway by this data, a period (.) must be entered between the numbers
(example: 255.255.255.254).
JULY/17/2009
CMEE