NEC Univerge SV8300 - Page 383

3-327 NWA-033623-001 Rev.8.1
91ch3003.fm
COMMAND CODE
TITLE:
RESTRICTION DATA/PAD DATA FOR TANDEM CONNECTION
36
DATA TABLE:
: Default
Y INCOMING
TRUNK
ROUTE
OUTGOING
TRUNK
ROUTE
SETTING DATA
RELATED
COMMAND
No. MEANING
0 Setting of restric-
tion data for tan-
dem connection
00
63
00
63
0
1
Allow
Restricted
CM35 Y=005
1 Setting of PAD
data for tandem
connection
aa bb
NONE
aa : PAD data from an incoming
trunk route to an outgoing
trunk route (01-31)
bb: PAD data from an outgoing
trunk route to an incoming
trunk route (01-31)
01: -15 dB
15: -1 dB
(1 dB increment)
16: 0 dB
17: +1 dB
31: +15 dB
(1 dB increment)
0 dB/0 dB
+: Gain
-: Loss
CM35 Y=005
NOTE: This command is effective for the following trunks.
- LDT/ODT/BRT/DTI/CCT/SIP/IPT (P2P CCIS)
~
~
~
~
~
~
JULY/17/2009
CM36