: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
0XX 0 : Maintenance Port
XX: Unit No. (01-50)
91 Port selection for OAI
NOTE 1, NOTE 2
0
1
Maintenance port
VOIP port
92 Port selection for SMDR
NOTE 1, NOTE 2
93 Port selection for PMS
NOTE 1, NOTE 2
100 SNMP port
NOTE 1
0
1
Open SNMP port
Not open SNMP port
NOTE 1: Only Unit No. 01 can be set by this data.
NOTE 2: This data is not effective for Secondary Unit (Unit No. 02-50).
101 Community Name
“admin”
0
1
Allow (admin)
Restrict (public)
NOTE 1: Only Unit No. 01 can be set by this data.
NOTE 2: Restrict the use of community name “admin” (set the community name
to “public”) except the system construction.
102 Trap is sent to the SNMP
manager NOTE
0
1
To send
Not sent
103 Definition of the IP
address for the SNMP
manager NOTE
0
1
Subnet Mask of the IP
address for the SNMP
manager (First place)
IP address for the SNMP
manager (Fourth place)
104 Kind of Trap message
(Specific, Object ID)
sent to SNMP manager
[Australia Only]
NOTE
0
1
Variable Trap message by
external alarm kind (MJ/
MN/--)
Fixed Trap message
NOTE: Only Unit No. 01 can be set by this data.
Continued on next page
To Next Page
Loading...
