: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
83 Provide the system with
the automatic change-
over to normal mode
from survival mode after
the connection between
the Main Unit and
Remote Unit returned to
normal condition
0
1
To provide
Not provided
CM0B
Y=1XX>81
NOTE 1: Only Remote Unit (Unit No. 02-50) can be set by this data.
NOTE 2: When this data is set to “0”, it remains possible that the changeover
between survival mode and normal mode is occurred with frequency at
the heavily-loaded network environment.
NOTE 3: While this data is set to “0” in Failover mode, when a Remote Unit is
changed over from survival mode to normal mode, a Remote Unit is
automatically connected to either Primary/Secondary Unit that is con-
nectable after restoring communication. Then a Remote Unit is reset
automatically.
[8300R6]
84 Start time for the auto-
matic changeover to
Failover mode from
Normal mode after the
disconnection between
the Primary Unit and
Secondary Unit
[8300R6]
00
01
99
NONE
Not executed the automatic
changeover to Failover
mode
0-30 seconds
2940-2970 seconds
90-120 seconds
CM0B
Y=1XX>80
NOTE: This data is effective only for Secondary Unit (Unit No. 02-50).
Continued on next page
To Next Page
Loading...
