: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
2XX 2 : VOIP Port
XX: Unit No. (01-50)
20 IP Address 2 (RTP) for
Vo I P D B
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
NOTE 5
XXX.XX
...X
NONE
IP Address
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
No data
21 IP Address 3 (RTP) for
Vo I P D B
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
NOTE 5
22 IP Address 4 (RTP) for
Vo I P D B
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
NOTE 5
23 IP Address 5 (RTP) for
Vo I P D B
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
NOTE 5
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the IP address (RTP) by this data, a period (.) must be entered be-
tween the numbers (example: 255.255.255.254).
NOTE 3: Up to 8 addresses (IP address 1 to 8) can be entered for IP address (RTP).
NOTE 4: One IP address (RTP) is required for every 16 used voice channels of VoIPDB.
NOTE 5: When using PZ-64IPLC-A/PZ-128IPLC-A, CM0B Y=2XX>00 is effective for
IP Address (RTP) for VoIPDB and CM0B Y=2XX>20-26 is ineffective.
Continued on next page
To Next Page
Loading...
