NEC Univerge SV8300 - Page 177

3-121 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
LAN DATA ASSIGNMENT
0B
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
2XX 2 : VOIP Port
XX: Unit No. (01-50)
146 HLC Mode
[8300R3]
0
1
2
NONE
Disable HLC
Enable HLC
Set HLC
Threshold
(As per CM0B Y=2XX>
147)
Enable HLC
CM0B
Y=300>XX4
CM0B
Y=2XX>147
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
147 HLC threshold
[8300R3]
0006
0000
FFFF
FFA0
NONE
+3 dBm0
0 dBm0
-0.5 dBm0
-48 dBm0
-10 dBm0
CM0B
Y=300>XX5
CM0B
Y=2XX>146
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
148 HLC Ramping out period
[8300R3]
10
1000
NONE
10 ms./dB
1000 ms./dB
700 ms./dB
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
149 HLC Power TC
[8300R3]
1
2
3
NONE
4 ms.
8 ms.
16 ms.
4 ms.
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
Continued on next page
~
~
~
~
~
~
JANUARY/31/2012
CM0B