: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
11 Information of
Remote System
Upgrade
XX01 Port number for
FTP server
XX: Unit No.
(01-50)
00001
65534
CCC
NONE
TCP Port No. for the FTP server
Clear
TCP Port No. 21
NOTE: Port No. 21 is used for the file transfer (control), and Port No. 20 is used for the
file transfer in default setting.
For example, when the second data is set to 3000, Port No. 3000 is used for the file
transfer (control), and Port No. 2999 is used for the file transfer.
XX02 User ID for FTP
server
XX: Unit No.
(01-50)
X
XXXXXXXX
CCC
NONE
User ID (Maximum 8 characters)
X: A-Z, 0-9
Clear
No data
NOTE: When no user ID is assigned, log into the FTP server with “anonymous”.
XX03 Password for FTP
server
XX: Unit No.
(01-50)
X
XXXXXXXX
CCC
NONE
Password (Maximum 8 characters)
X: A-Z, 0-9
Clear
No data
NOTE: While entering the password with CAT “*” (asterisk) is displayed on LCD. When
entering the password with the MOC screen, actual data is displayed.
XX04 Directory name
XX: Unit No.
(01-50)
XXX...X
CCC
NONE
Directory name
(Maximum 32 characters)
Clear
No data
NOTE: If the CPU program is in the root directory of the FTP server, the directory name
setting by this data is not required. In this case, the root directory name of the FTP
server can be obtained automatically.
Continued on next page
To Next Page
Loading...
