Continued on next page
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
50 Start updating IP
Station firmware
X
XXXXXXXX
IP Station No. 0 Start updating
NOTE: After setting the first data and second data, PCPro/CAT displays the status of the IP Station. The table
below shows the contents of the display and its meaning.
FIRST
DATA
IP STATION STATUS
SECOND
DATA
IP STATION STATUS
DISPLAY MEANING DISPLAY MEANING
X
XXXXXXXX
: IP Station
No.
AABB
CCDD
Current firmware version
of the IP Station
(For SIP Multiline Termi-
nal)
AABBCCDD
AA : 00-99: Integral No.
BB : 00-99: First decimals
No.
CC : 00-99: Second
decimals No.
DD : 00-99: Third
decimals No.
0: Start
updating
OK Start updating
DATA
NOT
FOUND
You cannot update the IP Station
firmware because the FTP/TFTP
server information data has not
been assigned
NOTE: Set this data after set-
ting CM0C
Y=00-07>00-05.
0000
XXZZ
Current firmware version
of the IP Station
(For IP Multiline Termi-
nal)
0000XXZZ
XX : 00-99: Integral No.
ZZ : 00-99: First decimals
No.
WAI T,
BUSY
NOW
You cannot update the IP Station
firmware because other four
IP Stations in the system are
updated now
NOTE: Maximum four IP Sta-
tions can be updated at
the same time in a sys-
tem.
Set this data after other
four IP Stations are up-
dated.
DATA
ERROR
The IP Station is logout
status/The terminal is not
IP terminal
You cannot update the IP Station firmware
WA IT,
BUSY
NOW
The IP Station is updated
now/The IP Station is
busy
To Next Page
Loading...
