NEC Univerge SV8300 - Page 199

3-143 NWA-033623-001 Rev.8.1
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, BLADE NUMBER
10
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING
DATA MEANING
01 IP terminal registra-
tion
0000
1535
Virtual Port num-
ber (for IP terminal)
EC00
EC31
Add-on Module number
NOTE: The same number
(the last two digits
of the data) should
not be used, for both
DSS Console
(E100-E131) and
Add-on Module
(EC00-EC31).
CM90
CM98
EEC000
EEC127
SIP Converter Number
[8300R3.5]
NOTE 1: Because SIP
Converter No.
assigned by this
command and
ZT (EE3000-
EE3127) No. as-
signed by CM10
Y=00 are shared,
be sure not to
overlap the set-
ting of each port.
NOTE 2: Simultaneous call
by three Standard
SIP station are
available per SIP
converter.
NOTE 3: A reset of the
Standard SIP sta-
tion is required to
enable this com-
mand setting after
the System Reset.
Continued on next page
~
~
~
RESET
JANUARY/31/2012
CM10