: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING
DATA MEANING
03 SIP trunk registration 01XXX Virtual Port num-
ber (for SIP trunk)
XXX: 000 (Port No.
for control
channel)
: 001-096
(Port No. for
voice chan-
nel)
[8300R3 or
before]
XXX: 000 (Port No.
for control
channel)
: 001-015
(Port No. for
control/voice
channel)
: 016-127
(Port No. for
voice chan-
nel)
[8300R4 or later]
D000
D511
Trunk No.
NONE No data
NOTE 1: SIP trunk can be accommodated only for the Main Unit (Unit01).
NOTE 2: Set one virtual port number for control channel between 000 and 015 for each
carrier.
NOTE 3: Virtual port number 001-015 for control/voice channel can be used for voice
channel when they are not used for control channel. One virtual port number
cannot be used both control channel and voice channel at the same time.
NOTE 4: Up to 96 virtual port numbers can be set for voice channel.
NOTE 5: License for SIP trunk channel is consumed sequentially from the lowest trunk
number.
NOTE 6: For virtual port number for voice channel, trunk route is allocated by CM30
Y=00 for each carrier.
Continued on next page
To Next Page
Loading...
