: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
05 Accommodation of Single
line telephone/FAX call
station to Multiline Termi-
nal
’
s Multiline, Accommo-
dation of PS to Soft
Phone’s Multiline
0
1
Accommodated
Not accommodated
CM10
CM90
CM13 Y=08
07 Service Restriction Class C 00
15
Service Restriction Class C (00-15)
NOTE: The features available in each Class are
programmed in CM15.
CM15
11 Kind of idle status of called
station on DID MFC call
0
1
2
3
Called station idle (No Charge)
Called station control (Charge)
Called station idle (Charge)
Called station idle (Charge)
Kind of idle status of called
station on DID MFC call
[8300R3.5]
0
1
3
Subscriber’s Line Free (No Charge)
Subscriber’s Line control
Subscriber’s Line Free (Charge)
12 Calling Party Number
displayed on called side
X
XXXX
NONE
ISDN/SIP subscriber number (ISDN/SIP Indial
No.)/Calling party number (for MFC Signaling on
DOD/Enhanced 911)
No data
CM12 Y=46
NOTE 1: As the second data, assign the Indial number informed when a call is originated from the station.
For a station for which no Indial number is informed, assign NONE.
NOTE 2: When the system accommodates both ISDN and SIP trunks, the subscriber number assigned by this com-
mand is used for ISDN. Assign a subscriber number with CM12 Y=46 for SIP.
13 ISDN/SIP Local Office
Code Table
00
14
15
ISDN/SIP Local Office Code Table number 00
ISDN/SIP Local Office Code Table number 14
No data
CM12 Y=47
CM50 Y=05
NOTE: When the system accommodates both ISDN and SIP trunks, the Local Office Code Table assigned by this
command is used for ISDN. Assign a Local Office Code Table with CM12 Y=47 for SIP.
Continued on next page
To Next Page
Loading...
