: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
24 Kind of Multiline Terminal 0
7
B mode
A mode
CM94
NOTE 1: Refer to PRECAUTION (3) for the combination of Line/Trunk/Feature Keys and One Touch Keys of the
Multiline Terminals. see PRECAUTION (3)
NOTE 2: The default data of this command is “0” (B mode) when the station number is assigned by CM10.
NOTE 3: After the 2nd data of CM12 Y=24 is changed, pull out and reconnect the modular connector of the Mul-
tiline Terminal.
25 Type of Voice Mail System
(VMS)
NOTE: Effective only
when CM08>443:
0.
0
3
VMS with DTMF signaling
VMS with MCI
CM08>443
26 Specification of Voice Mail
Live Monitoring mode
0
1
3
Available (Automatic mode)
Available (Manual mode)
Not available
29 Send indication data to
Line Key LCD of Multiline
Terminal (DESI-less)
0
1
To send indication data
Data sending completed/Not sent
CM15 Y=485
CM9C
Request my line number to
the Multiline Terminal
0
1
Available
Not available
CM15 Y=210
NOTE: When second data is inputted, my line number information is transmitted to Multiline Terminal according
to setting of CM15 Y=210.
Second data returns to 1 after the completion of transmitting my line number information.
30 Sending BLF message via
CCIS to Destination No.0
0
1
To send
Not sent
CM50 Y=08>0
31 Sending BLF message via
CCIS to Destination No.1
0
1
To send
Not sent
CM50 Y=08>1
32 Sending BLF message via
CCIS to Destination No.2
0
1
To send
Not sent
CM50 Y=08>2
33 Sending BLF message via
CCIS to Destination No.3
0
1
To send
Not sent
CM50 Y=08>3
Continued on next page
To Next Page
Loading...
