: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
46 Calling Party Number
displayed on called side
X-XXXX
NONE
SIP subscriber number (Indial No.)
No data
CM12 Y=12
47 Local Office Code Table 00
14
15
SIP Local Office Code Table number 00
SIP Local Office Code Table number 14
No data
CM12 Y=13
48 Connection between Soft
Phone and PS
0
1
3
Main station (Soft Phone)
Sub station (PS)
Not connected
50 Location number of IP Sta-
tion for Remote Connec-
tion
00
63
NONE
Location number 00
Location number 63
Location number 00
CM67
61 Warning SST sending timer
for forced release
0
1
2
3
Depends on Timer A (CM41 Y=0>114)
Depends on Timer B (CM41 Y=0>115)
Depends on Timer C (CM41 Y=0>116)
Forced release is not provided
CM35 Y=247
CM35 Y=248
NOTE: This command is effective when the forced release is provided to the destination trunk route (CM35 Y=247
and 248 is set to 0).
62 Do Not Disturb/Message
Waiting Lamp Indication
on Line/Trunk/Feature keys
of Multiline Terminal
0
2
3
Neither Message Waiting Lamp nor Do Not Dis-
turb Lamp is indicated
Do Not Disturb Lamp Indication
Message Waiting Lamp Indication
CM08>140
CM15 Y=188
CM15 Y=189
Continued on next page
To Next Page
Loading...
