: Default
Y SERVICE
REST.
CLASS (C)
SETTING DATA
No. MEANING DATA MEANING
199 Security Mode for DT700 Series 00
15
0
1
Restricted
Allow
NOTE: When this data is changed while the system is operating, reboot the terminal (re-login to the PBX).
280 Automatic change of Display for Multiline Terminal (DESI-
less) incoming call
[8300R3]
00
15
0
1
Allow
Restricted
284 Whether to light MW lamp on Multiline Terminal when
Incoming Call History (CID Call Back)/Message Reminder is
set
[8300R5]
0
1
Not lit
To light
285 Whether to light MW lamp on Multiline Terminal when
UM8000 Mail/Voice Mail Live Record is set
[8300R5]
0
1
Not lit
To light
286 Whether to light MW lamp on Multiline Terminal when
Message Waiting/Message Waiting Console/Message Center
Interface (MCI)/Open Application Interface (OAI)/Voice Mail
Live Record-CCIS is set
[8300R5]
0
1
Not lit
To light
289 Dial Mask on LCD during talking with trunk
[8300R6]
0
1
Allow
Restricted
NOTE: Set the second data of both CM15 Y=289 and CM35 Y=314 to “0” to be effective for Dial Mask on LCD.
290 When a called standard SIP station disconnects the incoming
call, whether the call is disconnected or continued by a calling
side
[8300R7]
00
15
0
1
Disconnected
Continued
Continued on next page
To Next Page
Loading...
