: Default
Y SERVICE
REST.
CLASS (C)
SETTING DATA
No. MEANING DATA MEANING
485 Time that LCD backlight for DT300/DT700 Series
[8300R2]
00
15
0
1
2
3
4
5
6
NONE
Always off
Always on
5 seconds
10 seconds
15 seconds
30 seconds
60 seconds
10 seconds
NOTE: After this data setting, this data is valid by resetting DT300/DT700 Series or executing CM12 Y=29.
486 Setting of VoIP Encryption for DT700 series
[8300R6]
00
15
0
1
2
7
To encrypt both
Control and Voice
packets
To encrypt Control
Packets only
To encrypt Voice
Packets only
Encryption not
provided
NOTE: After setting this command, a reset of the terminal is required.
489 Session Timer for Standard SIP station
[8300R7]
00
15
0
1
Allow
Restricted
NOTE: It is recommended that Periodic registration timer assigned by CM41 Y=0>151/152/153 is set to default
to enable this data setting.