: Default
Y STATION NUMBER (A) SETTING DATA
No. MEANING DATA MEANING DATA MEANING
0 Next station number in
Station Hunting group
X
XXXXXXXX
Station number (A) X
XXXXXXXX
NONE
Station number (B)
No data
When assigning station numbers to a Station Hunting group, only two station numbers
can be assigned per operation. By repeating the operation as often as required, all the sta-
tion numbers to be included in a Station Hunting Group can be assigned. The two station
numbers to be assigned with one operation are defined as Station Number (A) and Station
Number (B).
Example: When you define a Station Hunting-Terminal group using Station Numbers
300, 301, and 302, designate 300 as the pilot station number, and perform the
following three operations:
Station No. (A)
Station No. (B)
1st Operation 300 301
2nd Operation 301 302
3rd Operation 302 300
As seen above, one station can be either Station Number (A) or Station Number (B). Sta-
tion Number (A)/(B) is used to identify which of the two station numbers is to be
assigned first.
1 Kind of station
numbers included in
Station Hunting group
X
XXXXXXXX
Station number 0
1
Member station of Station
Hunting-Terminal
Pilot station of Station
Hunting-Terminal
Continued on next page
To Next Page
Loading...
