: Default
Y STATION NUMBER (A) SETTING DATA
No. MEANING DATA MEANING DATA MEANING
2 Secretary station:
Operation:
X
XXXXXXXX
Secretary station number 00
30
31
Secretary station serial
numbers
No data
The correspondence between Serial numbers and Secretary station numbers is set by
CM19.
The data can be set all the stations of the Station Hunting-Circular.
Also, each of the stations belonging to the same one Hunting group can be assigned its
own Secretary station.
NOTE: If an incoming call terminated to a Station Hunting group has encountered all line busy, the call is routed
to a designated station. This station is called “Secretary station”.
3 Display of station num-
bers included in Station
Hunting group
(Display only)
X
XXXXXXXX
Station number (A) X
XXXXXXXX
Station number (B)
(Display only)
NOTE: In CAT mode, the displaying station number is added 1 with every press of the S (Step forward) key regard-
less of the Station Hunting group. In Command Mode of PCPro, the next station number in the Station
Hunting group is displayed with every press of S (Step forward) key.
To Next Page
Loading...
