: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
208 Release of ISDN trunk when
receiving the ISDN DIS-
CONNECT message with
Progress Description=08
from ISDN (effective for an
incoming call from ISDN)
0
1
Not released
To release
NOTE: When sending the in-band tone to the called station from ISDN, set the second data to 0.
In this case, the ISDN trunk will be released automatically in 30 seconds after the called station receives
the in-band tone or when the called station goes on-hook.
220 ETSI ISDN Connected Line
Identification Presentation
(COLP) for a call terminat-
ing office
[For EU]
0
1
To provide
Not provided
CM15 Y=153, 154
CM35 Y=221
CM08>629
NOTE: When providing ETSI ISDN COLP, assign the connected line number for COLP as follows.
Connected line number: Local office code (CM50 Y=05) + ISDN Subscriber Number (CM12 Y=12)
221 Receiving connected line
number from call terminat-
ing office in ETSI ISDN
Connected Line Identifica-
tion Presentation (COLP) for
a call originating office
[For EU]
0
1
Available
Not available
CM15 Y=153, 154
CM35 Y=220
CM08>629
222 International Prefix Code for
ETSI ISDN Addressing
[For EU]
X
XXXX
NONE
Prefix Code
X: 0-9, A (*), B (#)
No data
223 National Prefix Code for
ETSI ISDN Addressing
[For EU]
X
XXXX
NONE
National Prefix Code
X: 0-9, A (*), B (#)
No data
Continued on next page
To Next Page
Loading...
