Y
1ST
DATA
MEANING
DEFAULT
2ND DATA
INCREMENT
UNIT
TIMER
0 165 Remote maintenance
permission timer
[8300R7]
NONE 01 02 03 ....................... 20 21 22 23
10 minutes
(02-20)
5 minutes 10 20 30 ...................... 200 360 720 1440
NOTE 1: Remote maintenance permission timer is not started up
when this data is set to “00”.
NOTE 2: The Permission timer is started to count down in concur-
rence with pushing down the key of remote maintenance
(assigned by CM90 Y=00: F1364), and the restriction of
remote maintenance is started after the elapse of the time
assigned by this data.
166 Interval of session
timer for standard SIP
station
[8300R7]
NONE 02 03 04 .........................................................99
1 minute
(02-99)
3 minutes 2 3 4 ..........................................................99
NOTE 1: When this data is set to “00”, this session timer is set to
1 day (1440 minutes).
NOTE 2: When this data is set to “01”, this session timer is set to
90 seconds.
NOTE 3: Assign this data to the same data of the session timer of
the terminal.
208 Time to start the 1st
VRS Waiting Mes-
sage from Incoming
(Announcement Ser-
vice Start after Call
Termination)
[8300R7]
NONE 01 02 03 .........................................................30
4 seconds
4-8
seconds
0 4 8 .........................................................116
4 8 12 ........................................................120
209 Time to start the 1st
VRS Waiting Mes-
sage from Incoming
(Greeting Mode)
[8300R7]
NONE 01 02 03 .........................................................30
4 seconds
4-8
seconds
0 4 8 .........................................................116
4 8 12 ........................................................120
Continued on next page
To Next Page
Loading...
