: Default
KIND OF SYSTEM COUNTER/PAD DATA SETTING DATA REMARKS
191 Setting of PAD data from a station/trunk to a
Conference Trunk for a Conference Trunk
connection
00
44
45
46
63
NONE
-45 dB
(1 dB increment)
-1 dB
0 dB
+1 dB
(1 dB increment)
+18 dB
-10 dB
+: Gain
-: Loss
194 Restriction of number of password entries
when Protection Mode is canceled
00
01
99
NONE
No limit
1 time
99 times
3 times
NOTE: When entering incorrect password for the number of times set by this command, DT700 Series will be
in password lock state.
195 Time to lock the DT700 Series when number
of password entries exceeded the limit
00
01
99
NONE
Not unlocked
1 minute
99 minutes
10 minutes
NOTE: When the DT700 Series is in password lock state, a password entry is restricted until the time set by
this command is elapsed.
198 Volume Control (Side Tone level) of DT300/
DT700 Series
00
01
32
NONE
-54 dB
-48 dB
-18 dB
-12 dB [For EU]/
-18 dB [Other than EU]
CM42>68
NOTE: For the volume control (Side tone level) of the Multiline Terminal/DESKCON, set the data by
CM42>68.
Continued on next page