NEC Univerge SV8300 - Page 442

3-386 NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE
TITLE:
EXTERNAL RELAY STARTING CONDITIONS
44
The following table shows the interface condition of each external relay.
EQUIPMENT KIND INTERFACE RELATED COMMAND REMARKS
External Tone Source
[8300R3]
DLC + PGD(2)-U10 ADP • CM05 Y=0
• CM10 Y=00
• CM12 Y=65: 3
• CM13 Y=32-34, 63
• CM44 Y=00: 02XX
• CM44 Y=01
• CM48 Y=0: 1300
• CM64 Y=1
• Start by External Relay Control
Circuit of PGD(2)-U10 ADP
• RCA connector of PGD(2)-U10
ADP for tone
Wake Up Call/Timed
Reminder tone source
[8300R3]
DLC + PGD(2)-U10 ADP • CM05 Y=0
• CM10 Y=00
• CM12 Y=65: 3
• CM13 Y=32-34, 63
• CM44 Y=00: 0100
• CM44 Y=01
• CM48 Y=1>00: 0200
• Start by External Relay Control
Circuit of PGD(2)-U10 ADP
• RCA connector of PGD(2)-U10
ADP for tone
Speaker Paging DLC + PGD(2)-U10 ADP • CM05 Y=0
• CM10 Y=00
• CM12 Y=65: 1
• CM12 Y=67, 68
• CM13 Y=32, 33, 34, 63
• CM20 Y=0-3: A070-
A079
• CM44 Y=00: 02XX
• CM44 Y=01
• Start by External Relay Control
Circuit of PGD(2)-U10 ADP
• RCA connector of PGD(2)-U10
ADP for tone
Indication for Trunk All
Busy
DLC + PGD(2)-U10 ADP • CM05 Y=0
• CM10 Y=00
• CM12 Y=65: 3
• CM13 Y=63
• CM30 Y=09, 20-26
• CM44 Y=00: 11XX
• CM44 Y=01
• CM54 Y=0
• CM55 Y=0
• Start by External Relay Control
Circuit of PGD(2)-U10 ADP
Continued on next page
JANUARY/14/2011
CM44