NEC Univerge SV8300 - Page 473

3-417 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
AUTOMATIC TRANSFER DESTINATIONS
51
: Default
Y GROUP NUMBER SETTING DATA
No.
MEANING
DATA MEANING DATA MEANING
08 Same as CM51 Y=06 (for station call) 00
63
Tenant 00
Tenant 63
E000
EBXXX
NONE
Attendant Console
[8300R2]
Voice Response
system No.
XXX: 000-007
[8300R6
software
or before]
: 000-015
[8300R7
software
or later]
No data
09 Transfer destination of incoming call when a
called station is set to Call Forwarding-All
Calls/Busy Line/No Answer and the destina-
tion of forwarded call is set to the Attendant
Console Night Mode is set (for DID/DIT/Tie
Line call)
X
XXXXXXXX
E000
NONE
Station No.
Attendant Console
[8300R2]
No data
Transfer destination of incoming call when Do
Not Disturb is set to the Attendant Console
Night Mode is set assigned by CM51 Y=10
(for DID/Tie Line call)
10 Transfer destination of incoming call when Do
Not Disturb is set to the called station (for
DID/DIT/Tie line/station call)
00
63
Tenant 00
Tenant 63
X
XXXXXXXX
E000
NONE
Station No.
Attendant Console
[8300R2]
No data
NOTE: This data is available when CM08>240 is set to 1.
Continued on next page
~
~
~
~
~
~
JANUARY/31/2012
CM51