NEC Univerge SV8300 - Page 475

3-419 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
AUTOMATIC TRANSFER DESTINATIONS
51
: Default
Y GROUP NUMBER SETTING DATA
No.
MEANING
DATA MEANING DATA MEANING
15 Destination of the call from the station to
which Message Waiting has been set/VMS
station for each tenant See CM13 Y=13
00
63
Tenant 00
Tenant 63
X
XXXXXXXX
E000
NONE
Station No./VMS
Station No.
Attendant Console
[8300R2]
No data
16 Alarm display on Multiline Terminal
See CM90 Y=00: F5020
01
02
Multiline
Terminal No. 1
Multiline
Terminal No. 2
X
XXXXXXXX
NONE
My line number
of Multiline
Terminal
No data
911 Notification on Multiline Terminal/
DESKCON
[North America Only]
See CM90 Y=00: F5025
(for Multiline Terminal)
See CM90 Y=00: F6124
(for DESKCON)
04
05
Multiline
Terminal/
DESKCON
No. 1
Multiline
Terminal/
DESKCON
No. 2
X
XXXXXXXX
or
E000
E007
NONE
Station No.
Attendant Console
0-7
No data
17 Destination of the call after the first time inter-
val of ACD/UCD Display Announcement
00
63
Tenant 00
Tenant 63
X
XXXXXXXX
E000
NONE
Station No.
Attendant Console
[8300R2]
No data
18 Transfer destination (to VMS) of the call that
is set Camp-On and not answered/Transfer
destination for Call Redirect
X
XXXXXX
NONE
VMS Station No.
No data
20 Destination (to VMS) of Call Forwarding-Not
Available in PS/Standard SIP Station
21 Destination of Alternate Hold Recall for
Enhanced Trunk Direct Appearance
X
XXXXXXXX
NONE
Station No.
No data
22 Transfer destination of the call for Call Redi-
rect
Continued on next page
~
~
~
~
~
~
~
~
~
~
~
JANUARY/31/2012
CM51