: Default
Y
TENANT
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
26 Number Display when
calling from Sub Line via
CCIS/ Number Display
through CCIS for SMDR
00-63 0
1
My Line number/name
Sub Line number/name
CM08>502
NOTE: When setting Name Display to sub line, whether to display My Line number/name or sub line num-
ber/name depends on CM08>502. Set this data to the same setting of CM08>502.
(ex.) When CM65 Y=26 is set to “0” (My Line number/name), set CM08>502 to “0”(Name of My
Line).
27 ACD (Automatic Call
Distribution)
00-63 0
1
ACD
Not ACD
28 RR sending priority when
receiving OAI SCF
0
1
Send RR signal after
SMFN
Send RR signal before
SMFN
29 Day/Night Mode 0
1
Two kinds of mode
(Day Mode, Night Mode)
Four kinds of mode
(Day Mode, Night Mode,
Mode A, Mode B)
30 VMS Password Privacy 0
1
Allowed
Not allowed
CM13 Y=10
34 Calling Party number
sent to MCI when access-
ing VMS from a sub line
assigned on Multiline
Terminal
0
1
Sub Line number
My Line number
36 Trunk Restriction Class
change according to the
schedule of Day/Night
Mode Change by System
Clock
0
1
Provide
(Day Mode/Night Mode
only)
Not provided
CM4A
CM65 Y=29
Continued on next page
To Next Page
Loading...
