NEC Univerge SV8300 - Page 523

3-467 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
LOCATION DATA ASSIGNMENT
67
Y=30, 31
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
30 Daylight Saving
time setting of each
location
00
63
Location number 0
NONE
To operate with Daylight
Saving time (+1 hour)
To operate with Standard
time
CM67 Y=10
CM0B Y=1XX>
10
NOTE 1: After changing the data, system data copy to Remote Unit by CMEC Y=8 is required.
NOTE 2: Usually do not set this command by PCPro/CAT. This command is set automatically when automatic
system clock change has been executed by CM43 Y=8/CM67 Y=31.
31 Automatic clock
change pattern
00
63
Location number 0
1
NONE
Change Pattern 0
Change Pattern 1
Automatic clock
change is not provided
CM43
Y=8>00-03
CM43
Y=8>04-07
Continued on next page
~
~
CM67