NEC Univerge SV8300 - Page 533

3-477 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR STATION SPEED DIALING
73
Example: If the number of Speed Dial numbers is 10 for Station Number 300, 20 for Station Number
301, and 30 for Station Number 302, the memory areas assignment is as follows.
Memory Start Block
Station 1000-Slot Memory Number (10-Slot Number of 10-Slot
Number Block Number Memory Block) Memory Block
300 00 00 01
301 00 01 02
302 00 03 03
303 00 06 01
The abbreviated codes for Station Speed Dialing are automatically determined by assigning this
command on a station basis.
If the number of Memory Parcels per station (or per station group) does not exceed 10, then Ab-
breviated Code=0-X.
If the number of Memory Parcels per station (or per station group) exceeds 10, then Abbreviated
Code=00-XX.
The following figure shows the relationship between Abbreviated Codes and Memory Parcels.
Continued on next page
In the case of 10 Memory Parcels
Memory
Parcel
Number
0
~
1
2
3
4
5
9
10-Slot
Memory Block
0
~
1
2
3
4
5
9
(Abbreviated
Code)
Memory
Parcel
Number
(Abbreviated
Code)
In the case of 20 Memory Parcels
0
~
1
9
0
1
9
10-Slot
Memory Block
00
~
01
09
10
11
19
~
10-Slot
Memory Block
~
JULY/17/2009
CM73