: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
5000
5255
LCR Pattern No. 000
LCR Pattern No. 255
177 Sharing LCR Pattern No.
with alternative routing
0
1
To provide
(As per CM8A Y=5000-
5255>178)
Not provided
(As per CM8A Y=5000-
5255>100)
178 Designation of Digit
Addition Pattern No.
( See CM8A
Y=5000-5255)
9000
9255
NONE
Digit Addition Pattern No.
000
Digit Addition Pattern No.
255
No digit addition
180 Origination of a call by
pressing “#” key
0
1
To provide
Not provided
181 Whether to provide Data
Conference/Instant Mes-
sage for each LCR pat-
tern
[8300R4]
0
1
Restricted
Allowed
NOTE: Set this data to “0” for the opposite office other than
SV8300 when using 8300R4 software.
183 Calling Name Notifica-
tion setting for SIP trunk
[8300R4]
00
15
Notify the name assigned
for each station (Notify the
name registered by CM77
Y=0, 1)
Not provide calling name
notification
NOTE: When this data is set to “0” but the name is not assigned by
CM77 Y=0/1, the calling number is notified. The procedure
of calling number notification follows the existing calling
number notification service.
Continued on next page
To Next Page
Loading...
