Y
SETTING
DATA
FUNCTION
STANDARD
KEY
SETTING
REMARKS
RELATED
COMMAND
No. MEANING
00 Setting of
Functions
[8300R2]
F6100 Room Cutoff (RC) For Hotel DESKCON
• Use the ANSWER key as the SET key for
Hotel features.
NOTE: Call Forwarding-All Calls Override
is effective when CM08>1014 is set
to “0” using 8300R5 software or
later.
F6101 Message Waiting (MW)
F6102 Do Not Disturb (DND)
F6103 Wake Up/Do Not Disturb Override
(WU/OV)/Call Forwarding-All
Calls Override
F6104 Reset (RESET)
F6105 Serial Call Set (SC) CM90 Y=00:
F6062
F6106 Flash over trunk (CAS) (SHF) CM35
Y=016
F6107 Busy Verification (BV) BV
NOTE 2
CM08>012
CM15
Y=009
F6108 Do Not Disturb Override
(DNDOV)/Call Forwarding-All
Calls Override
For Hotel DESKCON
• Do not assign this data to key numbers 1 to
4.
NOTE: Call Forwarding-All Calls Override
is effective when CM08>1014 is set
to “0” using 8300R5 software or
later.
F6109 Wake Up (WU)
F6110 Mode (MODE)
• For SN716 DESKCON, this data
is not required.
Day/Night
mode
change,
ATT Lock-
out
F6111 Programming (PROG)
• Remote Access to System (DISA)
• System Speed Dialing
• Date and Time
• Tone Ringer
• Choice of Night Service
CM2A
CM71
CM02
Continued on next page
To Next Page
Loading...
