NEC Univerge SV8300 - Page 623

3-567 NWA-033623-001 Rev.8.1
91ch3006.fm
COMMAND CODE
TITLE:
MULTILINE TERMINAL SOFT KEY ASSIGNMENT
9A
NOTE: This data can be assigned by PCPro, not by CAT.
Continued on next page
: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
22 Setting of Soft
Key name for
each Pattern
Number (for Sim-
plified Chinese)
(Pattern Number
0)
[8300R7]
[Asia]
NOTE
aa bb aa : Status Number (00-11)
00: Idle State
01: During dialing
(Holding no call)
02: During dialing
(Holding a station/trunk)
03: During calling
(Holding no call)
04: During calling
(Holding a station/trunk)
05: Being called
06: When called party is busy
(Holding no call)
07: When called party is busy
(Holding a station/trunk)
08: When called party sets DND
09: Trunk Busy
10: During Speaking
(Holding no call)
11: During Speaking
(Holding a station/trunk)
bb: Soft Key Number (00-15)
00-03: Indicated on 1st display
04-07: Indicated on 2nd display
08-11: Indicated on 3rd display
12-15: Indicated on 4th display
XX...XXX
NONE
Soft Key name indicated
on LCD (Maximum 6
characters; 12 digits)
No data
26 Setting of Soft
Key name for
each Pattern
Number (for Tra-
ditional Chinese)
(Pattern Number
0)
[8300R7]
[Asia]
NOTE
JANUARY/31/2012
CM9A