EasyManua.ls Logo

NEC Univerge SV8300 - Page 662

NEC Univerge SV8300
804 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-606 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
TRAFFIC MEASUREMENT
B1
Y1ST DATA
2ND DATA
No. MEANING DATA MEANING
TRAFFIC
DATA
MEANING
9 Display traffic data of
ZT
XXXZZ XXX: ZT No. (000-127)
ZZ : Time Zone No. (00-24)
XXXX
(4 digits)
Traffic data X.XXX erl
(Ex.) 1223 1.223 erl
NOTE 1: Meaning of the 1st data and 2nd data is as follows.
000: 00 (1st data): 1223 (2nd data)
Present time hourly measurement=1.233 erl
000: 01 (1st data): 1223 (2nd data)
Hourly measurement of 1st an hour=1.233 erl
NOTE 2: Pressing Enter key when Time Zone No. (1st data) is set to 24, “DATA ERROR” is displayed.
NOTE 3: When the 2nd data is entered during the data is being measured, “****” is displayed.
A Display percentage of
ZT B channel all busy
XXXZZ XXX: ZT No. (000-127)
ZZ : Time Zone No. (00-24)
XXX
(3 digits)
Percentage of B channel all
busy data X.XX %
(Ex.) 012 12 %
NOTE 1: Meaning of the 1st data and 2nd data is as follows.
000: 00 (1st data): 012 (2nd data)
Present time hourly measurement=12 %
000: 01 (1st data): 012 (2nd data)
Hourly measurement of 1st an hour=12 %
NOTE 2: Pressing Enter key when Time Zone No. (1st data) is set to 24, “DATA ERROR” is displayed.
NOTE 3: When the 2nd data is entered during the data is being measured, “****” is displayed.
JANUARY/31/2012
CMB1

Table of Contents

Other manuals for NEC Univerge SV8300

Related product manuals