NEC Univerge SV8300 - Page 681

3-625 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
SIP PROFILE DATA
BA
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
92 Setting of the display
name/user name for
From Header
00
31
Profile number
for control packet
0
2
3
Display name:
SIP AoR User
Description following
CMBA Y=45
User name:
SIP AoR User
Description following
CMBA Y=45
Display name:
Caller ID following
CMBA Y=44
User name:
SIP AoR User
Description following
CMBA Y=45
Display name:
Caller ID following
CMBA Y=44
User name:
Caller ID following
CMBA Y=44
CMA7 Y=71
CMBA
Y=44-47, 54
NOTE 1: A calling name to the called party is sent when this command is set to “3”.
NOTE 2: Set the second data to “3” for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
93 Setting of the Fully
Qualified Domain
Name (FQDN) for SIP
server with character
00
31
Profile number
for control packet
XXX...X
NONE
Domain name
(Maximum 32 digits)
No data
CMA7 Y=71
CMBA
Y=94-96, 99
NOTE 1: You can also confirm the domain name set by CMBA Y=94-96 with this command.
NOTE 2: When the setting of this command is changed, the DNS cache table should be cleared by CMBA
Y=99.
Continued on next page
RESET
~
RESET
~
JANUARY/31/2012
CMBA