: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
96 Setting of the Fully
Qualified Domain
Name (FQDN) for SIP
server with character
code (Last 8 charac-
ters)
00
31
Profile number
for control packet
XXX...X
NONE
Domain name
(16 digits, 8 charac-
ters fixed)
See Character
Code Table in
CM77.
To use SIP server IP
Address set by
CMBA Y=30
CMA7 Y=71
CMBA
Y=93-95, 99
NOTE 1: Concatenated characters assigned by CMBA Y=94, 95, and 96 are used as domain name.
NOTE 2: When the character code to be set is less than the number of digits necessary, add the character
code FF.
NOTE 3: You can confirm the domain name set by this command with CMBA Y=93.
NOTE 4: When the setting of this command is changed, the DNS cache table should be cleared by CMBA
Y=99.
NOTE 5: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
97 Error response code
when the system
receives the incoming
call, but all SIP trunks
are busy
00
31
Profile number
for control packet
0
1
7
480 Temporarily
Unavailable
486 Busy Here
503 Service Unavail-
able
CMA7 Y=71
NOTE: Set the second data to “7” for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
Continued on next page
To Next Page
Loading...
