: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
15 Registration of Stan-
dard SIP station with-
out REGISTER
[8300R5]
XXX
XXXX
Standard SIP sta-
tion ID without
REGISTER
XXX-XXXX
: 000-511
[8300R6 soft-
ware or
before]
: 000-1023
[8300R7 soft-
ware or later]
XXXX
XXXX
NONE
CCC
Standard SIP station
number without
REGISTER
(1-8 digits)
No data
Data clear
CM12 Y=97,
98
NOTE 1: Whether the Standard SIP station number is available or not can be confirmed by CMFA Y=02.
NOTE 2: Clear this data once when the readout data of CMFA Y=02 is “NONE” (IP Station is logout status/
IP Station has never been busy). Then set this data again.
NOTE 3: When the data for Standard SIP station or CM12 Y=97 is not assigned to the specified station in
registering the terminal, “DATA ERROR” is displayed.
NOTE 4: When the terminal is deleted by specifying the Standard SIP station ID while the call is in progress,
“WAIT, BUSY NOW” is displayed.
NOTE 5: Standard SIP station without REGISTER can be accommodated only for the Main Unit (Unit01).
16 IP Address for Greet-
ing process
[8300R5]
000
001
Greeting No. 000
Greeting No. 001
XXX.X
X...X
NONE
IP address of the
system for greeting
process (Maximum
15 digits)
XXX.XXX.XXX.XX
X=0.0.0.1-
255.255.255.254
No data
CMBC Y=17
NOTE 1: This data must be assigned when using Data Conference/Instant Message between SV8300 and
SV7000/SV8500.
NOTE 2: Greeting List Initialize by CMBC Y=17 is required after setting this data.
17 Greeting List Initialize
[8300R5]
000 Fixed value CCC Greeting List
Initialize
CMBC Y=16
To Next Page
Loading...
