NEC Univerge SV8300 - Page 733

3-677 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
Fault Information Display
After the following operation:
The fault information is displayed on PCPro/CAT. An example of fault information display is provid-
ed below:
ST + +EA0 + DE 00 + DE
DE EA0>0: XXXXXXXXXXXXXXXX- Fault Information 0
DE EA0>_
ST COMMAND=
S EA0>1: XXXXXXXXXXXXXXXX- Fault Information 1
S EA0>2: XXXXXXXXXXXXXXXX- Fault Information 2
S EA0>3: XXXXXXXXXXXXXXXX- Fault Information 3
S EA0>4: XXXXXXXXXXXXXXXX- Fault Information 4
S EA0>5: XXXXXXXXXXXXXXXX- Fault Information 5
S EA0>6: XXXXXXXXXXXXXXXX- Fault Information 6
S EA0>7: XXXXXXXXXXXXXXXX- Fault Information 7
S EA0>8: XXXXXXXXXXXXXXXX- Fault Information 8
S EA0>9: XXXXXXXXXXXXXXXX- Fault Information 9
For details of (1), (2), see next page.
(1)
CAT mode
EA0 +
0
+
EA0>0: XXXXXXXXXXXXXXXX-
(2)
JULY/18/2008
CMEA