NEC Univerge SV8300 - Page 739

3-683 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
MAINTENANCE BY PCPro/CAT
EC
(c) Hardware Test
NOTE: Analog telephone cannot display Indication 00 and 01.
(d) Software Test
01 : Idle
02 : Line Lockout
Other than 01, 02: Busy
INDICATION STATUS OF SINGLE LINE TEL.
STATUS OF
MULTILINE TERMINAL
STATUS OF
IP STATION
00 Normal operation of blade NOTE Terminal is not connected or
Tip wire is grounded
Terminal is not connected
01 Blade is not mounted/initialized
NOTE
Terminal is connected Terminal is connected
02 – Short circuit is made on the
line
03 – Ring wire is grounded
04 – DLC blade is not mounted
05 – Terminal failure
06 – DLC blade down
07 – –
08 – Line failure detect
JUNE/15/2011
CMEC