: Default
NOTE 1: This data is effective also when the system is under on-line mode.
NOTE 2: By CAT or PCPro connected to Unit No. 01, VoIPDB information of all units can be read
out. By PCPro connected to Unit No. 02-50, VoIPDB firmware information can be read out
only each unit connected to PCPro.
NOTE 3: Only Unit No. 01 can be set by 0103/110X/112X/0026/0027 as 1st data of CMFC.
NOTE 4: VoIPDB information read is effective only when PZ-64IPLC-A/ PZ-128IPLC-A is active.
When VoIPDB is not accommodated, or PZ-64IPLA/PZ-128IPLA is accommodated,
“HARDWARE ERROR” is displayed on LCD by executing VoIPDB information read.
NOTE 5: Example of readout data of VoIPDB information (SC-4002 CYG-IPS IPLC PROG-A1 Ver-
sion 1.00) is shown below.
- The first data “XXX2”(SC No.) ..........................4002
- The first data “XXX3”(Official Version) ............A1
- The first data “XXX4”(Official Revision)...........0001.00
- The first data “XXX5”(Year, Month, Day) .........2010/07/30
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
01
50
Unit No. 01
Unit No. 50
NOTE 1
NOTE 2
027 Latest Previous time of
SNTP execution
NOTE 3
aaaabb
ccddee
NONE
aaaa: Year
bb : Month
cc : Day
dd : Hour
ee : Minute
Not executed
To Next Page
Loading...
