NEC Univerge SV8300 - Page 82

3-26 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
SETTING OF SYSTEM SERVICES
04
Fixed pattern and Programmable pattern
CM04 Y=00>02 is the command which sets the system data such as CM90 and CM93 automati-
cally for Multiline Terminals. Therefore, Multiline Terminals can be used as Multiline Terminal
stations only by the setting of CM10.
The fixed pattern and programmable pattern that can be set by CM04 Y=00>02 are as follows.
• Fixed pattern 1 (CM04 Y=00>02: NONE)
CM Y No. 1ST DATA
2ND DATA
REMARKS
90 00 Key No. 00 NONE No data
90 00 Key No. 01 My Line number
90 00 Key No. 02-32 NONE No data
90 00 Key No. 90 F1015 Recall
90 00 Key No. 91 F1011 Feature
90 00 Key No. 92 F1012 Conf
90 00 Key No. 93 F1000 Redial
90 00 Key No. 94 F1016 Speaker
90 00 Key No. 95 F4001 Answer
90 00 Key No. 96 F1004 Transfer
90 00 Key No. 97 F1010 Hold
90 00 Key No. 98 F5015 Directory
90 00 Key No. 99 F0A46 Message
90 01 Key No. 00-32, 90-99 3 Day Mode: Ringing/
Night Mode: Ringing
90 02 Key No. 00-32, 90-99 1 No Delayed Ringing
90 03 Key No. 00-32, 90-99 1 Call Indicator Lamp control is
available
90 04 Key No. 00-32, 90-99 1 Group Feature Key is not
provided
93 - My Line number My Line number
12 22 My Line number 1 Soft keys are available
12 23 My Line number 3 Pattern number 3
JUNE/15/2011
CM04