: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
0 Blade Type XX ZZ XX : Unit No. (01-50)
ZZ : Slot No. (01-18)
See “About Unit
number, Slot number
and Circuit number”
50 ZT Interface Blade
(CD-4CSIB/
CD-4CSIB-A)
60 ISDN Line Circuit
Blade
(CD-2BRIA)
70 In-Skin UMS Blade
(CD-VM00)
71 Conference Blade
(CD-PVAA)
[8300R2]
NONE No data
1 Trunk Blade number 000
127
NONE
Trunk Blade number 000
Trunk Blade number 127
No data
CMAA
2 Number of Highway
channel for ISDN Data
Communication
[8300R3]
XX : Unit No. (01-50)
ZZ : Line/Trunk chas-
sis No. (01-03)
See“About Unit
number, Slot number
and Circuit number”
01
16
NONE
Number of Highway
channel for ISDN Data
Communication
No data
NOTE 1: Setting the Number of Highway channel to 16 is recommended when Highway channel of Line/Trunk
chassis remains.
NOTE 2: When the second data is NONE (no data), BRT/PRT blade for ISDN data communication must be ac-
commodated to the base slot (Slot No. 01/07/13) of each Line/Trunk chassis. In this case, the available
Highway channels for data communication are the only first 16 channels. Be sure to set this data when
performing data communication with PRT blade.
To Next Page
Loading...
