: Default
BASIC SERVICE SETTING DATA
050 If the * button on a DTMF telephone is pressed while hearing
busy tone, it is regarded as a Switch Hook Flash
0
1
Effective
Ineffective
051 If the # button on a DTMF telephone is pressed while hearing
busy tone, it is regarded as a Switch Hook Flash
0
1
Effective
Ineffective
055 Result of a Switch Hook Flash on a telephone which belongs to
House Phone Group 0 or 1
0
1
Special Dial Tone
(Dialing is available)
Attendant Recall
056 Result of a Switch Hook Flash on a telephone which belongs to
House Phone Group 2 or 3
0
1
Special Dial Tone
(Dialing is available)
Attendant Recall
057 Result of a Switch Hook Flash on a telephone assigned as a Hot
Line
0
1
Special Dial Tone
(Dialing is available)
Attendant Recall
062 Call transfer from a station before a called station answers 0
1
Not available
Available
063 Call transfer from a station before a called attendant answers
[8300R2]
0
1
Available
Not available
067 Automatic Change of Night Service (Attendant Overflow)
[8300R2]
0
1
Available See CM30 Y=03
Not available
068 Camp-On Tone sending to a busy station by Camp-On
[8300R2]
0
1
Send out only once
Repeat at 4 second intervals
069 When a station user has dialed any one digit while hearing busy
tone
0
1
Switch Hook Flash
Step Call
076 Warning tone is sent to C.O. line, when a station or operator
overrides a busy station connected to a C.O. line.
[8300R2]
0
1
To send
Not sent
077 Toll Restriction-Total Digit Count for PB to PB/DP to PB Con-
nection
[Not used in North America]
0
1
To provide
Not provided
078 Trunk seizure sequence when CM35 Y=083: 0
NOTE: When the system is installed with loop-start trunks, it is
important to select the highest available trunk setting
to prevent call collisions.
0
1
Highest available trunk
Lowest available trunk
Continued on next page
To Next Page
Loading...
