Custom Signal Adjustments: Tap this setting
and then tap the Signal Adjustments toggle to
open an adjustment panel for each frequency
band. You can adjust the signal strength for each
band from -20 dB to +20 dB.
Combine Utilization: Enable this setting to
combine 802.11 and non-802.11 channel
utilization into one total utilization
measurement. In environments with 802.11ax
traffic, turn this setting on to accurately measure
channel utilization. When this setting is enabled,
Product app screens that typically show both
802.11 and non-802.11 utilization (such as the
General Settings and Tools
100
To Next Page
Loading...
Need help?
General
