Wi-Fi Channels Map)now show the total
utilization.
User-Defined MAC: This setting affects the Wi-Fi
Test Port only. Tap the toggle switch to enable a
user-defined MAC address. When enabled, an
additional User-Defined MAC field appears
under the toggle setting. Tap the lower field to
enter your desired MAC address for the Product.
When a User-Defined MAC is enabled, (User-
defined) appears next to the MAC address on the
About screen and on relevant test result screens.
NOTE: Both Wi-Fi and Wired test ports have
their own User-Defined MAC settings.
General Settings and Tools
101
To Next Page
Loading...
Need help?
General
